Discussion of user-defined parameters for recursive subspace identification: Application to seismic response of building structures     

Shieh-Kung Huang  Jun-Da Chen  Kenneth J. Loh  Chin-Hsiung Loh 《地震工程与结构动力学》2020,49(15):1738-1757

Structural damage assessment under external loading, such as earthquake excitation, is an important issue in structural safety evaluation. In this regard, an appropriate data analysis and system identification technique is required to interpret the measured data and to identify the state of the structure. Generally, the recursive system identification algorithm is used. In this study, the recursive subspace identification (RSI) algorithm based on the matrix inversion lemma algorithm with oblique projection technique (RSI-Inversion-Oblique) is applied to investigate the time-varying dynamic characteristics. The user-defined parameters used in the RSI-Inversion-Oblique technique are carefully discussed, which include the size of the data Hankel matrix (i), model order to extract the physical modes, and forgetting factor (FF) to detect the time-varying system modal frequencies. Response data from the Northridge earthquake from the Sherman Oaks building (CSMIP) is used as an example to examine a systematic method to determine the suitable user-defined parameters in RSI. It is concluded that the number of rows in the data Hankel matrix significantly influences the identification of the time-varying fundamental modal frequency of the structure. An algorithmic model order selection method using the eigenvalue distribution of RSI-Inversion can detect the system modal frequencies at each appending data window without causing any abnormality.  相似文献   

区域地震台网历史震相数据整合与共享服务     

刘伟  王庆良  王丽艳  柴旭超  王文青  朱飞鸿 《地震地磁观测与研究》2020,41(5):200-208

区域地震台网震相数据是区域地震台网产出的重要成果，是开展地球科学研究的重要资料。整理全国31个省份1973-2008年区域地震台网纸质震相报告和地震卡片，按统一格式录入震相数据，建立数据共享服务系统。文中系统阐述区域地震台网的发展过程、历史震相数据的整合、地震观测报告的主要内容及震级的测定方法，并介绍了历史震相数据共享服务系统和快速索引下载方法，为科研人员提供共享服务。  相似文献   

赤峰中心地震台地面与井下地震观测系统监测能力对比分析     

郭延杰  于章棣  齐彬彬  屈楠  范东海  黄瑞滨  刘继伟 《地震地磁观测与研究》2020,41(4):100-104

为分析总结地面与井下地震观测系统的特点，以赤峰中心地震台地面与井下观测系统为研究对象，在噪声分析、噪声功率谱分析、地震监测能力和观测动态范围等方面进行分析。结果表明，2套观测系统的RMS均可达到Ⅱ级环境地噪声水平，井下观测系统噪声小于地面观测系统。对2套观测系统的功率谱密度、有效动态范围的对比均表明，井下观测系统的动态范围比地面观测系统超出约10%，因此，井下观测系统地震监测能力优于地面观测系统，井下观测系统能更有效地记录观测数据。  相似文献   

重力数据约束的二维地震层析成像在台湾海峡南部的应用     

王笋  闫培  刘善虎 《大地测量与地球动力学》2019,39(3):302-306

地震-重力联合反演可以降低多解性，针对大勘探范围内岩石波速-密度关系存在较大散布的问题，引入交叉梯度结构约束构建统一的目标函数是一种有效的解决方案。利用台湾海峡南部HX-13测线进行验证：由于火成岩侵入体的存在，部分区域难以拾取可靠的地震初至，常规的走时反演无法准确恢复基底面的形态。搜集研究区的船测重力资料，根据地震地质条件和数据特点设置合适的反演参数，实现基于物性和结构双重约束的重力-地震联合反演。由对反演结果的分析和解释可以看出，该方法可在很大程度上弥补地震数据不完备的缺陷，使反演过程稳定，并提高模型的可靠性。  相似文献   

高分辨率反射波地震勘探在城市隐伏断裂探测中的应用——以成都天府新区苏码头断裂为例     

刘远志  刘胜  李大虎  夏友钢  李颖  周德帅 《大地测量与地球动力学》2019,39(9):910-915

采用“三小三高二绝招”的工作方法，通过静校正、多域多方法联合噪音衰减和精细的速度分析获得较高分辨率的地震时间剖面，揭示苏码头断裂的展布位置、构造形态及变形样式等。结果表明，区域构造以冲起式为主，在反冲断层与逆冲断层之间形成冲起构造或逆冲三角构造，在地震剖面上有明显的楔状特征。通过地震测线的断层走向以NE为主，倾向以SE为主，部分断层倾向为NW。  相似文献   

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits     

《Applied Ocean Research》2019

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.  相似文献   

Wave tank and bench-top control testing of a wave energy converter     

《Applied Ocean Research》2019

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.  相似文献   

小跨高比带楼板半通缝连梁抗震性能有限元分析          下载免费PDF全文

张超  陈向上  于德湖 《世界地震工程》2018,34(1):051-62

为了缓解联肢剪力墙中小跨高比连梁发生低延性的剪切破坏，增强连梁的变形和耗能能力，可在单连梁中轴线位置设置半通缝并配置交叉斜筋，形成半通缝连梁。本文完成了的对7种连梁的模拟，分析了在小跨高比、低周反复荷载作用条件下不同类型带楼板连梁的承载力、变形能力、刚度退化和耗能能力以及不同跨高比、不同开缝位置对带楼板半通缝连梁抗震性能的影响。结果表明:楼板会使半通缝连梁的剪压比增大，延性下降；但相比于普通连梁和双连梁，半通缝连梁具有较好的变形能力和承载力，可在实际中推广。  相似文献   

使用宽频带地震记录研究2017年6月24日茂县新磨滑坡的动力学过程   总被引：1，自引：0，他引：1       下载免费PDF全文

黄兴辉  李正媛  余丹  许强  苏金蓉 《地球物理学报》2018,61(10):4055-4062

北京时间2017年6月24日5时39分左右，四川省茂县叠溪镇新磨村发生大型岩质滑坡.体积约4.3×10⁶ m³的巨型岩体从山顶脱落，顺坡滑行约2.6 km后破碎沉积；碎屑物掩埋了整个新磨村，造成了巨大的人员伤亡和财产损失.本文使用来自滑坡周围的10个地震台站的宽频带观测资料的长周期信号反演了这次滑坡的受力时间函数；同时使用逐步细化的格点搜索方法得到了滑坡的位置，与其真实位置一致；根据反演的受力时间函数计算了滑坡过程中滑体的运动学参数，得到的滑体运动轨迹与实际路径吻合.综合分析地震信号、受力时间函数和运动学参数表明，本次滑坡主运动的持续时间约为79 s；脱落岩体在5∶38∶50.2启动后持续加速，在5∶39∶37.2达到速度峰值，约为52.1 m·s^-1；这段时间内岩体没有明显的破碎；之后，岩体开始铲刮并裹挟古滑坡造成的碎屑沉积物，自身也开始破碎解体，总体开始减速运动，直到5∶40∶9.2主运动停止；此后，小规模的碎屑散落又持续了约10 s的时间.  相似文献   

A multidirectional conditional spectrum     

《地震工程与结构动力学》2018,47(4):945-965

This paper presents a procedure to generate multidirectional conditional spectra (MDCS) that allow for the characterisation of seismic demands at different angles of incidence. Being conditional on a particular period and its direction of maximum response, it is considered to be a natural evolution of the conditional spectrum to account for the effects of directionality, that is, the variation of seismic demands as a function of the angle of incidence of ground motions, which can have a significant effect on the performance of different kinds of structures. The three main components needed for the generation of MDCS are explained in detail. Monte Carlo simulations are conducted using different sampling methods to assess the effects of incorporating the correlation between demands at different orientations for the same oscillator period, and a novel correlation model is proposed for this purpose. The statistical characteristics of MDCS, their relation with the conditional spectrum, the advantages of the MDCS over previous definitions of orientation‐specific spectra, and prospective future developments are discussed.  相似文献